Filter
Top Products
Patch 86261-04 For Rapier and AT-8800 Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 9
Patch 86261-04 for Software Release 2.6.1
C613-10386-00 REV D
A device in a supplicant role failed to authenticate if it used EAP-MD5
encryption with Windows 2000 or 2003 Server as the RADIUS server. Also,
a fatal error occurred if the device received EAPOL packets containing a
very large value in the packet length field. These issues have been resolved.
Syslog entries did not contain the date, time and unique identifier of the
message source. This issue has been resolved. The CREATE LOG OUTPUT
and SET LOG OUTPUT commands have been modified to control whether
or not this information is included.
The following parameter has been added to the CREATE LOG OUTPUT
and SET LOG OUTPUT commands:
[SYSLOGFORMAT=NORMAL|EXTENDED]
If the SYSLOGFORMAT parameter is set to EXTENDED the date, time and
unique identifier of message source are included in the syslog message. If
the parameter is set to NORMAL, this information is not included in the
syslog message. The default is NORMAL.
When IP multicasting was not enabled, all IP multicast packets were passed
to the CPU, causing overloading. This issue has been resolved. Now, if IP
multicasting is not enabled, these packets are not sent to the CPU.
When executing the command:
ADD IP ROUTEMAP ENTRY SET ASPATH
followed by the command:
ADD IP ROUTEMAP ENTRY COMMUNITY ADD=YES
where the values for ROUTEMAP and ENTRY were the same in both
commands, the second command failed and returned a “
ROUTEMAP clause
already exists
” error message. This issue has been resolved.
Fibre GBICs on Rapier and AT-8800 series switches sometimes did not
establish a link when powered on for the first time. This issue has been
resolved.
Two VRRP log messages were displayed when they should not have been.
The log messages were:
Vrrp 1: Vlan vlan2 10 Port Failed decrementing priority by 20
Vrrp 1: Vlan vlan2 1 Port up incrementing priority by 2
This issue has been resolved. These messages are now displayed at the
correct time.
PCR: 31191 Module: PORTAUTH, USER Level: 2
PCR: 31192 Module: LOG Level: 3
PCR: 31193 Module: IPG Level: 2
PCR: 31194 Module: BGP, IP Level: 3
PCR: 31201 Module: SW56, SWI Level: 2
PCR: 31205 Module: VRRP Level: 3