Filter
Top Products
20 Patch Release Note
Patch SB251-13 for Software Release 2.5.1
C613-10361-00 REV M
• IPv4 addresses x.x.x.0 or x.x.x.255 were not accepted for the LOCAL
parameter in the ADD IPV6 TUNNEL command.
• IPv6 addresses 2002:x:x::/48 were not accepted for the IPADDRESS
parameter in the ADD IPV6 INTERFACE command.
Changes have been implemented to prevent loss of connectivity between
line cards.
When port speeds were set using a configuration script, their capabilities on
line cards with CAM, were being incorrectly reported. This issue has been
resolved.
The SwitchBlade SB4108 chassis was failing the L3 Full Mesh test. This issue
has been resolved.
The SHOW SYSTEM command was not correctly displaying the Compact
Flash patch files.
Fatal errors were occasionally occurring when multicast forwarding was
updated. This issue has been resolved.
If a SET operation failed, the recovery process applied the default
MAXBANDWIDTH setting, regardless of either the configured value, or
the port speed capability. This was resulting in the MAXBANDWIDTH
value being too high. This issue has been resolved.
Additional messages will now advise the file transfer status as files are
transferred between compact flash and flash memory.
The SwitchBlade, SB4104 chassis, was failing the L3 Full Mesh test. This
issue has been resolved.
IPX routing did not work in certain circumstances. This issue has been
resolved.
For switches configured for VRRP, it was not possible to Ping the switch
operating in the Master state. This issue has been resolved.
A fatal error occurred in the load balancer when there were no UP resources
in a resource pool. This issue has been resolved. Load balanced TCP
PCR: 03760 Module: SWI Level: 1
PCR: 03763 Module: SWI Level: 2
PCR: 03770 Module: SWI Level: 2
PCR: 03773 Module: SWI Level: 3
PCR: 03775 Module: SWI Level: 2
PCR: 03777 Module: QOS Level: 2
PCR: 03782 Module: QOS Level: 3
PCR: 03794 Module: SWI Level: 2
PCR: 03797 Module: SWI Level: 1
PCR: 03188 Module: IPG, SWI, VRRP Level: 3
PCR: 03189 Module: FIREWALL, LB Level: 3