Altinex 400-0026-004 Switch User Manual


 
MATRIX SWITCHERS
2
PRECAUTIONS/SAFETY WARNINGS 1
Please read this manual carefully before using your
HOMERUN Series Matrix Switcher. Keep this
manual handy for future reference. These safety
instructions are to ensure the long life of your
HOMERUN Series Matrix Switcher and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.
1.1 GENERAL
Unauthorized personnel shall not open the unit
since there are high-voltage components
inside.
Qualified Altinex service personnel, or their
authorized representatives must perform all
service.
1.2 INSTALLATION
For best results, place the HOMERUN Series
Switchers on a flat, level surface in a dry area,
away from dust and moisture. To prevent fire
or shock, do not expose this unit to rain or
moisture.
Handle your HOMERUN Switcher carefully.
Dropping or jarring can damage the internal
components. Do not place heavy objects on
top of the HOMERUN Switcher.
Do not place the HOMERUN Switcher in direct
sunlight, near heaters or heat radiating
appliances, or near any liquid. Exposure to
direct sunlight, smoke, or steam can harm
internal components. Do not pull the power
cord or any signal cables that are attached to
the HOMERUN. If the HOMERUN is not used
for an extended period of time, disconnect the
power cord from the power outlet.
1.3 RACK-MOUNT INSTALLATION
Use only Altinex supplied rack-mount ears for
mounting the HOMERUN Switcher into a rack.
The maximum operating ambient temperature
is 45 degrees Centigrade.
When installing the HOMERUN Series
Switcher into a rack, distribute individual units
evenly, otherwise hazardous conditions may be
created by an uneven weight distribution. Allow
1-U rack space for every 4 HOMERUN
Switcher modules for air circulation. This will
reduce heat build up and will prolong the life of
the HOMERUN Switcher.
Connect the HOMERUN Series Switcher to a
properly rated power outlet.
Reliable grounding of the HOMERUN Series
Switcher should be maintained by using the
provided 3-prong power cord only.
Furthermore, make sure that the rack is
properly grounded.
1.4 CLEANING
Unplug the HOMERUN Series Switcher’s
power cord before cleaning.
Clean surfaces with a dry cloth. Never use
strong detergents or solvents such as alcohol
or thinner. Do not use a wet cloth or water to
clean the unit.
1.5 FCC NOTICE
This device complies with the part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference that may cause
undesired operation.
Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instruction manual, may cause harmful
interference in which case the user will be
required to correct the interference at his own
expense.