Altinex MT105-101 Switch User Manual


 
MULTI-TASKER
400-0131-004
2
2
PRECAUTIONS / SAFETY WARNINGS 1
Please read this manual carefully before using your
MT105-100/101. Keep this manual handy for future
reference. These safety instructions are to ensure
the long life of your MT105-100/101 and to prevent
fire and shock hazard. Please read them carefully
and heed all warnings.
1.1 GENERAL
Qualified ALTINEX service personnel, or
their authorized representatives, must
perform all service.
1.2 INSTALLATION
To prevent fire or shock, do not expose this
unit to rain or moisture. Do not place the
MT105-100/101 in direct sunlight, near
heaters or heat radiating appliances, or near
any liquid. Exposure to direct sunlight,
smoke, or steam can harm internal
components.
Handle the MT105-100/101 carefully.
Dropping or jarring can damage the card.
Do not pull the cables that are attached to
the MT105-100/101.
Insert the card carefully into the slots of the
Multi-Tasker™ without bending any edges.
When removing a card, please make sure
that the card to which it is attached is also
pulled out simultaneously to prevent damage
to the cable and connectors.
1.3 CLEANING
Clean only the connector area with a dry
cloth. Never use strong detergents or
solvents, such as alcohol or thinner. Do not
use a wet cloth or water to clean the card.
Do not clean or touch any component or
PCB.
1.4 FCC / CE NOTICE
This device complies with part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that may
cause undesired operation.
This equipment has been tested and found
to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at their expense.
Any changes or modifications to the unit not
expressly approved by ALTINEX, Inc. could
void the user’s authority to operate the
equipment.