AMCC 9650SE Computer Accessories User Manual


 
Controller Object Commands
www.3ware.com 33
/c
x
show serial
This command reports the serial number of the specified controller /cx.
Example:
//localhost> /c0 show serial
/c0 Serial Number = F12705A3240009
/c
x
show pcb
This command reports the PCB (Printed Circuit Board) version of the
specified controller /cx.
Example:
//localhost> /c0 show pcb
/c0 PCB Version = RevX
/c
x
show pchip
This command reports the PCHIP (PCI Interface Chip) version of the
specified controller /cx.
Example:
//localhost> /c0 show pchip
/c0 PCHIP Version = 1.x
/c
x
show achip
This command reports the ACHIP (ATA Interface Chip) version of the
specified controller /cx.
Example:
//localhost> /c0 show achip
/c0 ACHIP Version = 3.x
/c
x
show numdrives
This command reports the number of drives currently managed by the
specified controller /cx. This report does not include (logically) removed or
exported drives.
On 9500S and earlier controllers, physically-removed disk(s) will still be
counted. For a workaround, see “/cx/px show smart” on page 79.
Example:
//localhost> /c0 show numdrives
/c0 Number of Drives = 5