Filter
Top Products
Help Commands
www.3ware.com 93
Help with attributes
As you work with specific objects or commands, you can also use ? to get
help.
For example: If you enter the command /c0
show and then need help on what
specific attribute syntax is possible, you can use ? to get help as following:
//localhost> /c0 show ?
/cx show
/cx show attribute [attribute ...] where attribute is:
achip|allunitstatus|autocarve(9000 series)|
autorebuild(9550SX only)|bios|carvesize(9000series)|
driver|drivestatus|exportjbod|firmware|memory|model|
monitor|numdrives|numports|numunits|ctlbus(9550SX,
9590SE, 9650SE only)serial|ondegrade (9000S only)|pcb|
pchip|spinup|stagger|unitstatus|
/cx show all where all means attributes and configurations.
/cx show diag
/cx show alarms [reverse]
/cx show rebuild (9000 only)
/cx show verify (9000 only)
/cx show selftest (9000 only)
//localhost>
help
This help command provide a table of contents, providing help with the
overall navigation of the CLI commands. Typical output looks like the
following.
//localhost> help
Copyright(c) 2004-2006 Applied Micro Circuits Corporation
(AMCC). All rights reserved.
AMCC/3ware CLI (version 2.x)
Commands Description
--------------------------------------------------------------
show Displays information about controller(s), unit(s) and port(s).
flush Flush write cache data to units in the system.
rescan Rescan all empty ports for new unit(s) and disk(s).
update Update controller firmware from an image file
commit Commit dirty DCB to storage on controller(s). (Windows only)
/cx Controller specific commands.
/cx/ux Unit specific commands.
/cx/px Port specific commands.
/cx/bbu BBU specific commands. (9000 only)
/ex Enclosure specific commands. (9550SX, 9590SE, and 9650SE only)
/ex/slotx Slot specific commands.
/ex/fanx Fan specific commands.
/ex/tempx Enclosure Temperature Sensor specific commands.