Filter
Top Products
Unit Object Commands
www.3ware.com 63
/c
x
/u
x
show storsave
This feature only applies to 9550SX, 9590SE, and 9650SE model controllers.
This command reports the storsave policy on the unit.
For more information see, “/cx/ux set storsave=protect|balance|perform
[quiet]” on page 70.
Example:
//localhost> /c0/u5 show storsave
/c0/u5 Command Storsave Policy = protect
/c
x
/u
x
show identify
This feature only applies to 9550SX, 9590SE, and 9650SE model controllers.
This command is related to the /cx/ux set identify
command. It shows the
identify status of the specified unit (either on or off).
Example:
//localhost> /c0/u0 show identify
/c0/u0 Identify status = on
/c
x
/u
x
show autoverify
This feature only applies to 9000 series controllers.
This command shows the current autoverify setting of the specified unit.
Example:
//localhost> /c0/u0 show autoverify
/c0/u0 Auto Verify Policy = off
/c
x
/u
x
show cache
This command shows the current write cache state of the specified unit.
Example:
//localhost> /c0/u0 show cache
/c0/u0 Cache State = on