Filter
Top Products
American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 28American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 27
Accu Roller 250™ System Menu Accu Roller 250™ Editing Program
VER - Use this function to display the Software version of
the unit.
1. Access the main menu.
2. Tap the UP button until “SPEC” is displayed, press ENTER.
3. Tap the UP button until “VER” is displayed, press ENTER.
4. The display will show “V-X.X”, “X.X” stands for the version
number, such as the display may show “V-1.0”, “V-9.9” etc.
5. Press ENTER or MODE/ESC to exit.
EDIT - This feature allows you to write and store a preset
show into the fixtures internal memory (EEPROM) via the con-
trol panel or via the external controller. This show can then be
recalled at anytime without a controller.
RUN - With this function you can run your pre-made pro-
gram. You can set the number of steps under “STEP”, and
you can edit the individual scenes under “EDIT”.
1. Access the main menu.
2. Tap the UP button until “EDIT” is displayed, press ENTER.
3. Tap the UP button until “RUN” is displayed, press ENTER.
4. Press the UP button to display “ON” to activate this function,
or “OFF” to deactivate this function.
5. Press ENTER to confirm.
6. Press MODE/ESC to return to the main menu.
STEP - With this function you can define the number of
steps in the Run Program.
1. Access the main menu.
2. Tap the UP button until “EDIT” is displayed, press ENTER.
3. Tap the UP button until “STEP” is displayed, press ENTER.
4. The display shows “S-01”, “01” stands for the first step of
your program. You can call up to 48 scenes in “Run”. For exam-
ple, if “S-05” is displayed, it means that “Run” will run the first 5
scenes you saved in “Edit”.
5. Press ENTER to save and MODE/ESC to exit.