Filter
Top Products
American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 16American DJ® - www.americandj.com - Accu Roller 250™ Instruction Manual Page 15
Accu Roller 250™ System Menu Accu Roller 250™ System Menu
ADDRESS MENU -
AOO1 - A511 (Value) - This is where you set the DMX address of
the unit.
TEST MENU -
T-01 - T-XX (Test) - Tests the functions of each channel. There
are eight channels, but only channels 1,2,3,4, and 6 can be
tested.
AUDI MENU -
MAST (Master) - Runs the unit as master in sound active mode.
ALON (Alone) - Runs the unit stand alone, sound active mode.
RESE (RESET) MENU -
ALL - Resets all the motors in the unit.
SCAN - Resets the motors that control pan/tilt.
COLR (Color) - Resets the color motors.
GOBO - Resets the gobo motors.
SHTR - Resets the shutter motors.
TIME MENU -
LIFE - Displays the fixtures total running time.
LAMP - Displays the lamp running time.
CLMP - Clears the lamp running time.
RPAN (RE
VERSE PAN) MENU -
ON/OFF - When “On” is chosen it will reverse the pan.
RTILT (REVE
RSE TILT) MENU -
ON/OFF - When “On” is chosen it will reverse the tilt.
Display menu of ACCU ROLLER 250
1 ADDR A001~A511 Indicate the staring DMX address
A001 also
is the setting for slave
2 TEST T-01~T-XX Automatically test the function
MSTR Runs fixture as “master” for audio
3 AUDI
ALON Runs fixture as “alone” for audio
ALL Reset all motors and returns fixture to home
SCAN Reset only motors for pan/tilt
COLR Reset only motors for colors
GOBO Reset only motors for gobo and rotation
4 RESE
SHTR Reset only motors for shutter and/or dimmer
LIFE 0000~9999 Displays the total fixture running time
LAMP 0000~9999 Displays a lamps running time
5 TIME
CLMP Clear lamp running time
6 RPAN ON/
OFF Reverses the pan movements
7 RTLT ON/
OFF Reverses the tilt movements
VALU D–XX
D
-00 (DXXX) Display the DMX512 value of each channel
D ON ON/
OFF Display turn off after 2mins
8 DISP
FLIP ON/OFF This function will reverse the dis
p
la
y
180
RDMX
ON/OFF Change DMX address via external
controller
SPOT ON/
OFF Lamp optimization
DFSE ON/
OFF Resets all the fixture functions to default
9 SPEC
VER V1.0~V9.9 Software version
STEP S–01 ~
S–48 Set the amount of your program
C–01
0 1 XX(00~FFH)
: :
C–30
3 0 XX(00~FFH)
TIME T – XX(01~FFH)
SCXX
CEDT ON/
OFF
10 EDIT
RUN ON/OFF Pro
g
ram test