Filter
Top Products
25
Ready
B. PROGRAMMING FLOWCHARTS
The following section of this manual explains the programming of the preprogrammed cycles and Program
Locations (system parameters) through the use of flowcharts. A flowchart is a diagram of the programming
process.
Four (4) different symbols will be used in the flowcharts:
display symbol
key symbol START/ENTER STOP/CLEAR
Each display symbol will represent a readout on the Phase 7 non-coin microprocessor controller (computer) light
emitting diode (L.E.D.) display, and each key symbol will represent a key that is pressed. For example:
1. If the flowchart shows the symbol , the Phase 7 non-coin microprocessor controller (computer)
L.E.D. display will read the same.
2. If the flowchart shows the symbol , press that specific key on the keyboard (touch pad) label.
3. This symbol represents “STOP/CLEAR”.
4. This symbol represents “START/ENTER”.
a. The flowchart arrows (i.e., ) represents the program path.
b. On the sides of the flowcharts are explanations of the flowchart procedure, and in some cases, the
programming limits.
Listed below is an index of the flowcharts on the following pages.
Flowchart Titles
Page
Entering and Exiting Program Mode......................................................................................................... 26
System Parameters (Program):
0 LANGUAGES ............................................................................................................................... 29
1 SYSTEM PARAMETERS ............................................................................................................30
2 “A-F” CYCLES ............................................................................................................................. 59
3 “0-40” CYCLES ............................................................................................................................ 59
4 DEFAULT SETTINGS.................................................................................................................. 72
Ready