Filter
Top Products
1-2 ADTTE Matrix Keyboard Operator's Manual
Keypad Overview
1. Site field shows the status of the connected
switching system. See the appropriate
operating instructions for additional
information.
2. Monitor field shows the number of the
monitor controlled by the keyboard.
3. Camera field shows the number of the
camera controlled by the keyboard.
4. Entry field shows the numbers being
entered on the keypad (see item 18).
5. Status field shows the current operating
state of the system. During normal
operation, “P” appears in this field. During
system menu programming, “M” appears in
this field. When the keyboard lock is
enabled, “L” appears in this field; if blank,
the keyboard lock is disabled.
6. + is used with the Config button to
increase selected keyboard settings.
When used with the Shot function, enables
programming of the preset.
7. – is used with the Config button to
decrease selected keyboard settings.
When used with the Shot function, enables
recall of the preset.
8. Lock button toggles the state of the
keyboard lock when used with the
password. See Chapter 2 for specific
instructions.
When used with camera selection, this
button toggles the camera control lock.
See Chapter 3 for specific instructions.
1 2 3 4
1518 171920
30
6
29
28
27
5
7
14 21 22
13
8
9
10
11
12
23
24
26
25
16