Filter
Top Products
MX28B600
- 1 -
1. GENERAL INFORMATION
1.1 Introduction
DC Power Plants from APC DC Network Solutions Inc. (hereafter in this document “APC”)
have unique features that make them easy to install, maintain, and upgrade. The rectifier units
are modular and truly “hot-pluggable” into the shelf assembly without any separate AC wiring.
All system settings are made from the system control unit that provides monitoring and control
functions for each component of the system as well as alarm listings for system diagnosis and
maintenance.
The APC’s international network of sales and service offices and qualified representatives
provides sales assistance for proposals, purchases, and after-sales support.
APC provides nationwide support 8am to 8pm EST. 8pm to 8am Emergencies only by
leaving a message with a paging system by dialing:
(800) 800-4APC
This service will answer your call, gather specific service information, and have a qualified APC
service representative contact you as quickly as possible (refer to section on customer service
and support).
1.2 Precautions
It is extremely important to read, understand, and strictly follow the instructions in
sections on installation and setup. Also, please note the special SAFETY PRECAUTIONS
outlined in Section 5.1.4 before beginning actual installation of the power system.
If any precautions are not clearly understood, or local conditions are not covered, contact the
nearest APC representative call us at 800-800-4APC for clarification.
Also, refer to all applicable federal, state, and local regulations, and industry guidelines for
correct installation of this power system.
1.3 Inspection upon Receipt of Goods
1.3.1 General
APC has taken precautions in packing the power equipment for shipment to ensure its safe
arrival; however, the entire shipment including any and all boxes or crates should be inspected
upon receipt for evidence of damage that may have occurred during transit.
1.3.2 Visible External Damage
It is the responsibility of the person receiving the shipment to inventory and inspect all materials
against the bill of lading or waybill provided IMMEDIATELY
upon taking delivery while the
carrier representative is STILL ON SITE
. Please be sure that all items are accounted for,
including the correct number of pallets and the quantity of all accessory and/or component
boxes. Also, note any visible external damage that may have occurred during transit.
If damage has occurred or the quantity of items is not correct, then: