Filter
Top Products
WebConsole - System Options
67
NI Series WebConsole & Programming Guide
To browse for a Module file and then upload it to the Master:
1. Click the Browse button next to the Select a module to upload text field to browse for Duet
Modules on your PC/Network.
2. Select the JAR file that you want to upload to the Master.
3. Click the Submit button to upload a copy of the selected JAR file to the target Master's /unbound
directory.
If a file of the same specified name already exists within the /unbound directory, the system
will prompt you to confirm overwriting the existing file.
Only JAR file types are allowed for Upload to the target Master.
Manage Devices - Bindings
Click the Bindings link (in the Manage Devices tab) to access the Manage Device Bindings page
(FIG. 47). Use the options on this page to configure application-defined Duet virtual devices with
discovered physical devices.
The table on this page displays a list of all application-defined devices, including each device’s "Friendly
Name", the Duet virtual device’s D:P:S assignment, the associated Duet Device SDK class (indicating
the type of the device), and the physical device’s D:P:S assignment. This information has to be pre-coded
into the NetLinx file currently on the Master.
Any corresponding module within the /bound directory will not be deleted. Bound
modules must be deleted via the Purge Bound Modules on Reset selection described
within the Configure Device Bindings section.
FIG. 47 System - Manage Devices (Manage Device Bindings)