Filter
Top Products
ADSST-SALEM-3T
Rev. 0 | Page 9 of 24
ABSOLUTE MAXIMUM RATINGS—ADSST-218X
Table 5.
Rating
Parameter Min Max
Internal Supply Voltage (V
DDINT
) –0.3 V +3.0 V
External Supply Voltage (V
DDEXT
) –0.3 V +4.0 V
Input Voltage
1
–0.3 V +4.0 V
Output Voltage Swing
2
–0.5 V V
DDEXT
+ 0.5 V
Operating Temperature Range 0°C 70°C
Storage Temperature Range –65°C +150°C
1
Applies to bidirectional pins (D0–D23, RFS0, RFS1, SCLK0, SCLK1, TFS0, TFS1,
A1–A13, PF0–PF7) and input-only pins (CLKIN,
RESET
,
BR
, DR0, DR1,
PWD
).
2
Applies to output pins (
BG
,
PMS
,
DMS
,
BMS
,
IOMS
,
CMS
,
RD
,
WR
, PWDACK,
A0, DT0, DT1, CLKOUT, FL2–FL0,
BGH
).
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. These are stress
ratings only; functional operation of the device at these or any
other conditions above those indicated in the operational sec-
tions of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.