Filter
Top Products
63) Stop Frequency
64) Stop Frequency (lowest byte)
65) Minimum Frequency Step Size (highest byte)
66) Minimum Frequency Step Size
67) Minimum Frequency Step Size
68) Minimum Frequency Step Size (lowest byte)
69) Scale Top
6
(highest byte)
70) Scale Top
71) Scale Top
72) Scale Top (lowest byte)
73) Scale Bottom (highest byte)
74) Scale Bottom
75) Scale Bottom
76) Scale Bottom (lowest byte)
77) Frequency Marker 1
7
(highest byte)
78) Frequency Marker 1 (lowest byte)
79) Frequency Marker 2 (highest byte)
80) Frequency Marker 2 (lowest byte)
81) Frequency Marker 3 (highest byte)
82) Frequency Marker 3 (lowest byte)
83) Frequency Marker 4 (highest byte)
84) Frequency Marker 4 (lowest byte)
85) Frequency Marker 5 (highest byte)
86) Frequency Marker 5 (lowest byte)
87) Frequency Marker 6 (highest byte)
88) Frequency Marker 6 (lowest byte)
89) Single Limit
8
(highest byte)
90) Single Limit
91) Single Limit
92) Single Limit (lowest byte)
93) Multiple Limit Segment # (1)
94) Multiple Limit Segment Status
95) Multiple Limit Start X
9
(highest byte)
96) Multiple Limit Start X
97) Multiple Limit Start X
98) Multiple Limit Start X (lowest byte)
99) Multiple Limit Start Y (highest byte)
100) Multiple Limit Start Y (lowest byte)
101) Multiple Limit End X (highest byte)
102) Multiple Limit End X
103) Multiple Limit End X
104) Multiple Limit End X (lowest byte)
105) Multiple Limit End Y (highest byte)
106) Multiple Limit End Y (lowest byte)
107–162) Repeat bytes 93-106 for segments 2-5
163) Start Distance
10
(highest byte)
Site Master PM 15
6 See Control Byte #4 “Set Site Master Scale” for data format
7 marker point = (# of data points–1)*(marker freq – start freq)/(stop freq – start freq ) where # of data points can
be found in bytes 55-56, start freq is in bytes 57-60, and stop freq is in bytes 61-64.
8 See Control Byte #6 “Set Site Master Single Limit” for data format.
9 See Control Byte #112 “Set Site Master Segmented Limit Lines” for data format.
10 Distance data uses units 1/100,000m (or feet)