Filter
Top Products
Rack LCD Console KVM Switch User’s Manual6
Installation
Brackets
Caution: Use only the hardware provided
to install the KVM Rack LCD in the rack.
1. Attach the left and right mounting rails to the
inside of the rack. The flange that supports the
KVM Rack LCD station will be to the inside.
– Screw the front flanges to the rack first.
2. Slide the bars with the rear flanges toward the
rack until the flanges make contact with the
rack then screw the rear flanges to the rack.
3. Slide the KVM Rack LCD ()
onto the support flanges ().
Use the screws () supplied to
loosely attach the front of the
KVM Rack LCD to the front of
the rack.
– Do not fully tighten the
screws at this time.
na0347a