Filter
Top Products
ii
Safety Information (continued)
16. Overloading - Do not overload the wall outlet where this device is being connected.
Do not overload this device. Ensure the total load to this device does not exceed that
which is listed in the Specifications section of this manual.
17. Openings - Do not push any object into the vents provided for cooling, as such an
object may come into contact with high-voltage components and cause injury, death, or
damage to the device. Do not allow liquids to enter any opening in this device.
18. Servicing - There are no user-serviceable components within this device. Removal of
any cover from this device may present a shock hazard, and/or void the warranty.
19. Damage Requiring Service - If any type of damage occurs to this device,
immediately disconnect it from the wall outlet. Do not use the Power switch or line cord
into the rear of the device to disconnect power. Notify APC Technical Support or
Customer Service at once.
20. Replacement Parts - There are no components within this device that can or should
be removed/replaced unless it is by an APC-qualified technician.
21. Periodic Inspection - Inspect the line cords. telephone/data cords, or DSS/Cable TV
coaxial cables connected to this device to ensure they remain fully pushed in or
attached, and that they are not frayed or otherwise damaged.
Power Service Grounding
Electrode System
Electric Service
Equipment
Ground Clamps
Grounding Conductors
Antenna Discharge Unit
Antenna Lead In Wire
Ground
Clamp
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRIC CODE (nec)