Filter
Top Products
11NetBotz Rack Monitor 200 Installation and Quick Configuration Manual
How to Connect an Alarm Beacon and Other
Optional Devices
1. To install an alarm beacon:
– Mount the alarm beacon in a visible position
either on the roof of the rack or inside the rack.
– Route the alarm beacon cable to the Rack Monitor
200. The alarm beacon cable may be extended to a
maximum of 100 m (300 ft), using RJ-45
couplings and standard CAT-5 cables.
– Connect the cable to the Beacon port.
2. Connect one device to the Voltage Output.
Caution: The Relay Output is rated for Class 2 circuits only.
3. Connect one device to the Relay Output.
4. Connect a device to the Switched Outlet.