Filter
Top Products
ECM-3612
70 ECM-3612 User’s Manual
3.5.4 Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
3.5.4.1 OnChip IDE Channel10/11
The chipset contains a PCI IDE interface with support for two IDE channels. Select Enabled
to activate the primary IDE interface. Select Disabled to deactivate this interface.
The choices: Enabled, Disabled.
3.5.4.2 IDE Prefetch Mode
For faster drive accesses. If you install a primary and/or secondary add-in IDE interface, set
this field to Disabled if the interface does not support prefetching.
The choices: Enabled, Disabled.
3.5.4.3 Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-4) for each
of the four IDE devices that the onboard IDE interface supports. Modes 0 through 4 provide
successively increased performance. In Auto mode, the system automatically determines
the best mode for each device.
The choices: Auto, Mode 0, Mode 1, Mode 2, Mode 3, or Mode 4.
3.5.4.4 Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33,
select Auto to enable BIOS support.
The choices: Auto, Disabled.
3.5.4.5 Init Display First
This item allows you to decide to active whether PCI Slot or AGP first.
The choices: PCI Slot, AGP.