Filter
Top Products
User’s Manual
ECM-3612 User’s Manual
75
3.5.5.7 MODEM Use IRQ
This determines the IRQ in which the MODEM can use.
The choices: NA, 3, 4, 5, 7, 9, 10, 11.
3.5.5.8 Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state when the system has “hung”.(Only could working on ATX Power supply)
The choices: Delay 4 Sec, Instant-Off.
3.5.5.9 State After Power Failure
This item controls the system allowing enough time to save its state in memory. After
primary power is restored, the system can reestablish its state during power failure
recovery and continue operation.
The choices: Auto, On, Off.
3.5.5.10 Wake Up Events
PM Wake up events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything which occurs to a device which is configured as On, even
when the system is in a power down mode.
3.5.5.10.1 VGA
System can be awaked by VGA monitor.
The choices: On, Off.
3.5.5.10.2 LPT & COM
System can be awaked by LPT port, COM port or both.
The choices: NONE, LPT, COM, LPT/COM.