Filter
Top Products
After Disk First Aid starts, follow the instructions on the screen. Disk First
Aid checks your hard disk for any problems.
3When Disk First Aid has finished checking your hard disk, choose Quit from the
File menu.
4 Open the Drive Setup program.
You use the Drive Setup program to update your hard disk.
5 In the list of drives, click your startup disk.
6Pull down the Functions menu and choose Update Driver.
7When the update process is finished, quit Drive Setup.
8Shut down your computer.
9 Start up your computer from disk 1 from your set of system software disks, or from the
CD-ROM disc that contains system software.
See “Starting Up From a CD-ROM Disc” or “Starting Up From a Floppy
Disk” in the section “Initializing a Hard Disk” earlier in this chapter.
The Installer’s Welcome screen appears. You may have to double-click the
System Software Installer icon to open the Installer program.
10 Click OK.
The Easy Install dialog box appears.
99
Troubleshooting
Disk on which
system software
will be installed
Click here to install the
software you need.
Click here to install on
a different disk.
You may have
a later version
of system
software.