Filter
Top Products
12
4. If you see a pop-up menu that lists zones, select the
zone you want.
If your network has been set up to allow you to
choose a zone but you have not yet done so, the
menu lists choices, with your designated zone
selected. The zone you select determines the
default location for any network services
provided by your computer and listed in the
Chooser (such as file sharing). Before you select
a zone different from the one already highlighted,
consult your network administrator.
5. Make any changes you want to the AppleTalk
address.
Consult your network administrator if you need
assistance with this information.
6. Close the AppleTalk control panel.
A dialog box asks you to confirm your changes.
7. Click Save to save the changes you made in the
AppleTalk connection.
You are now ready to use AppleTalk services
available on your Ethernet network.
For Apple Ethernet CS II Twisted Pair and Coax
Cards only:
8. Check that the LED light on the card (above the port)
indicates that the card is working properly.
Twisted Pair Card: The light is pale green when the
connection is good. The green light blinks brightly
when data is being transmitted from the card.
Coax Card: The light is pale green when the card
is selected in either the AppleTalk or the TCP/IP
control panel. The green light blinks brightly
when data is being transmitted from the card.