Filter
Top Products
8
If you purchased a new Macintosh with an Apple
Ethernet CS II card, you may already have the
required software installed.
If a PCI Network Installer disk is included with your
card, perform the steps in “Installing the Software,”
next.
If no PCI Network Installer disk is included with
your card, the latest software is already installed.
Skip ahead to “Setting the Network Software
Selector.”
Installing the Ethernet software
To install the latest version of Ethernet software
you need to use the Installer program on the PCI
Network Installer disk, included with your card.
For safety, make sure that the Installer disk is locked
before you use it. To lock a disk, slide the tab on the
back side so that the square hole is open.
Keep the Installer disk after installation in case you
need to reinstall Ethernet software some time in
the future.
Close all open applications before installing.
Installing Your Software