Filter
Top Products
7
Connecting an Apple Ethernet CS II
AAUI Card
1. Plug the AAUI connector from your network
transceiver cable into the AAUI port on your card.
You need a specific AAUI-compatible transceiver
for the kind of media used for your network: thick
coax, twisted-pair, thin coax, fiber-optic, or
twisted-pair hub. The transceiver connects your
computer to the main network cable.
2. Turn on the computer’s power switch and start up the
computer.
You’ve made all the necessary hardware
connections. Next you’ll install and set up your
network communication software. For
instructions, turn to “Installing Your Ethernet
Software” later in this booklet.
The AAUI connector
attaches to the card’s port.
The cable also connects to the
appropriate AAUI-compatible
transceiver for your network.