Filter
Top Products
40 Chapter 4 Enhancing Your Computer
7 Hold the access panel against the base of the computer and tighten the screw.
8 Gently turn the computer right side up. Then reconnect the cables you disconnected
from your computer.
9 Press the Power button on the side of your computer to turn it on.
Making Sure Your Computer Recognizes the New Memory
After installing additional memory in your eMac, check whether the computer
recognizes the new memory. Do the following:
1 Start up your computer.
2 When you see the Mac OS desktop, choose Apple (K) > About This Mac.
Warning: Operating the computer when it is open or missing parts can be dangerous
and could damage your computer.
Total memory installed
in your eMac
LL2522.book Page 40 Wednesday, February 18, 2004 11:53 AM