Filter
Top Products
12. Press "FEED" button and the label backing paper will come
out from the slot under the H cover.
15. Close the top cover and turn on the printer or press the
"FEED"
button if the printer is already on.
13. On OS-202 Peel-Off mode, powered on status, in case of
improper installation, just keep pressing the "FEED"button to
back-feed the label stock to re-install it.
Note :
14. To remove any slack, just rewind the media onto the roll.
Press down the print head module firmly.
The "FEED" button will not drive the printer to peel. The
peeling work can be executed only when the software
setting is ready.
Label
H Cover
Slot
Feed Button
21
22