Filter
Top Products
User’s Manual 57
Appendix A. Renewing Client IP Addresses
Perform the following to renew the IP addresses of client computers after config-
uring your FR3000 Series Router:
A.1 Windows 95/98/Me
Perform the following steps to Release and Renew the IP Address on each client
attached to the Router:
1. Go to the Start Button on the lower
menu bar.
2. Select Programs/DOS Prompt from
the menu.
3. At the DOS Prompt, type
winipcfg
and hit the Enter key.
4. Select your adapter card from the
list shown.
5. Click the
Release All button.
6. Click the Renew All button.
7. Click OK.
A.2 Windows NT/2000
Perform the following steps to reset the IP address of any Windows NT or 2000
computers:
1. Go to the Start button on
the lower menu bar. From
the Start button, choose
Run.
2. Type Command and
press Enter.
3. At the command line, type
ipconfig /release_all and
press Enter.