Asante Technologies FR3000 Series Network Router User Manual


 
70 Asanté FriendlyNET Cable/DSL Router
dance with the specifications in Subpart B of Part 15 of FCC rules, which are
designed to provide reasonable protection against such interference in a resi-
dential installation. However, there is no guarantee that interference will not oc-
cur in a particular installation.
If you suspect this equipment is causing interference, turn your unit on and off
while your radio or TV is showing interference, If the interference disappears
when you turn the unit off and reappears when you turn the unit on, something
in the unit is causing interference. You can try to correct the interference by one
or more of the following measures: 1) reorient or relocate the receiving antenna;
2) increase the separation between the equipment and the receiver; 3) connect
the equipment to an outlet on a circuit different from that to which the receiver is
connected; 4) consult the place of purchase or an experienced radio/television
technician for additional suggestions. Any changes or modifications not ex-
pressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Safety Advisory
1. The FriendlyNET router should be operated from the type of power source
indicated on the marking label. If you are not sure of the type of power avail-
able, consult your dealer or local power company.
2. Do not allow anything to rest on the power cord or where persons will walk on
the cord.
3. Never push objects of any kind into the router through cabinet slots as they
may touch dangerous voltage points or short out parts that could result in a
risk of fire or electric shock. Never spill liquid of any kind on the product.
4. Do not attempt to service the router yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all servicing
to servicing to service personnel.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic com-
patibility, EN 55022/A1 Class B, and EN 50082-1. This meets the essential pro-
tection requirements of the European Council Directive 89/336/EEC on the ap-
proximation of the laws of the member states relation to electromagnetic com-
patibility.