Filter
Top Products
62 Asanté FriendlyNET Cable/DSL Router
If the problem is with a hub or switch attached to the router, check the following:
1. Attach a known working client computer and cable to the router port used to
attach the hub or switch. This will verify that the router port is functioning. If
the Router is defective, call Asante Technical Support for further assistance.
2. If the port functions correctly, make sure the router is attached to an Uplink
Port on the hub or switch. If there is an Uplink button on the hub or switch,
make sure it is in the Uplink position.
3. If there is no uplink port on the hub or switch, then you will need to purchase
a crossover cable from your electronics dealer.
Note: Most workstation cables purchased from computer or electronic stores will
be wired to T568A or T568B specifications.
O
THER
HINTS
ABOUT
CABLING
The following are other ways to avoid problems with cabling:
1. Try to avoid running cables near or across power cables.
2. Staples should not be used to secure Ethernet cables. Clips or hangers
used for telephone wires are available at most hardware stores.
3. Avoid devices that create “noise”, such as florescent light fixtures, printers,
copy machines, electric heaters, speakers, TV sets, microwave ovens, tele-
phones, electric fans, and washing machines.
4. If you bundle a group of cables together with cable ties (zip ties), do not
tighten them so tightly that you deform the cables.
5. Avoid stretching Ethernet cables. This can cause them to become defective.
6. NEVER run Ethernet cable outside of a building. This can produce a very
dangerous lightning hazard.