Filter
Top Products
49
To set the recording parameters:
1. Click to enable Start recording whenever there’s an unusual condition
occurs.
2. When enabled, key in or use the arrows to set the recording duration
in seconds. The default value is 2 seconds.
3. Click OK to save settings and exit.
4.4.4 Record setting
The Record setting section contains parameters that allows you to
congure the recording duration whenever condition is detected. To set
the recording parameters, click the Record setting item from the setup
dialog box. The following submenu appears:
e3325_vga sw_0829.indb 49 2007.8.29 11:34:14 AM