Filter
Top Products
24
ASUS A7V266 User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
11) Clear RTC RAM (2-pin CLR_RTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup parameters by
erasing the CMOS RTC RAM data. The RAM data in CMOS, that include system
setup information such as system passwords, is powered by the onboard button
cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery.
3. Short the jumper by removing and replacing the jumper cap.
4. Re-install the battery.
5. Plug the power cord and turn ON the computer.
6. Hold down the <Del> key during the boot process and enter BIOS setup
to re-enter data.
A7V266
01010 1
A7V266 Clear RTC RAM
Remove and then
replace the jumper cap.
CLRTC
CR2032 3V
Lithium Cell
CMOS Power
12) Thermal Sensor CPU Setting (2-pin THEMCPU)
This jumper selects the type of CPU and coordinates its thermal sensory capability.
The default setting, [1-2], is for Athlon/Duron and, [2-3], is for Reserve type
processors.
A7V266 THEMCPU Setting
A7V266
01010 1
RESERVEDATHLON/DURON
THEMCPU
3221
(Default)