Filter
Top Products
20
ASUS A7V266-EX User’s Manual
3. HARDWARE SETUP
3. H/W SETUP
Motherboard Settings
4) Voltage Regulator Output Setting (VID1, VID2, VID3, VID4)
This jumpers allow you to manually adjust the CPU core voltage. It is
recommended to use CPU Default as the CPU core voltage. CPU Default, all
jumpers [2-3], means the Vcore is generated according to the CPU VID
configuration. For each jumper setting, there are two voltage options,
depending on the CPU used.
R
A7V266-EX
A7V266-EX CPU Core Voltage
Selection
321
1.85/1.825Volts
VID2
VID3
VID1
VID4
VID2
VID3
VID1
VID4
321
1.75/1.725Volts
1.7/1.675Volts
1.8/1.775Volts
321
321
R
A7V266-EX
A7V266-EX OVER Voltage Selection
OVER2
OVER1
1
2
OVER Voltage
ENABLE
2
3
(Default)
OVER Voltage
DISABLE
3) Voltage Over Setting (OVER1, OVER2)
This jumper opens or closes the circuit to control the use of voltage increases to
enhance CPU performance. The default setting, [2-3] disables the use of “over-
voltage” increases. Switch the jumper cap to [1-2] before attempting changes
with the VID jumpers. NOTE: It is not recommended to use this feature unless
confident that the CPU will not be damaged.