Filter
Top Products
2-23
ASUS AP1720-E1 barebone server
5. Carefully insert the drive into a
bay on the second drive cage as
shown.
6. Connect the IDE and power
cables to their corresponding
connectors on the back of the
drive.
4. Check the HDD jumper setting. Refer to the label pasted on the HDD
for the setting description. The setting “Cable Select” is recommended.
7. Follow steps 2 to 5 if you wish to install other hard disk drives.
8. Re-install the side cover when done. Refer to section “21.2 Installing
the side cover.”