Filter
Top Products
2-47
ASUS AP1720-E1 barebone server
To install the front I/O board:
1. Place the I/O board in the
bracket, component side up.
Secure the front I/O board to the
bracket with a screw.
2. Position the I/O board into the bay
with the component side to the
left (close to the HDDs). Connect
the I/O cables to the connectors
on the back of the I/O board.
3. Insert the I/O board into the bay
until the bracket fits the front
edge of the bay.
4. Secure the I/O board bracket with
a screw.
1394 connector (red)
USB 2.0 connectors (blue)
Audio connector (black)