Filter
Top Products
Chapter 2: Hardware setup
2-32
One-backplane configuration
In a one-backplane configuration:
• the upper SCSI interface of the backplane connects to the SCSI/RAID
card
• a SCSI multi-mode terminator (LVD/SE) is connected to the lower SCSI
interface of the backplane
Power connectors
(connect power plugs
from the power supply)
68-pin SCSI connector
(connects the SCSI cable
from the SCSI/RAID card)
SMBus connector (upper 6-1 pins)
(connects the SMB cable from the
motherboard)
68-pin SCSI connector
(with SCSI multi-mode terminator)
Fan connector (for HDD fan)