Filter
Top Products
2-39
ASUS AP1720-E1 barebone server
2.10.3 SCSI backplanes
To remove a SCSI backplane:
1. Remove the HDD fan cage. Refer to section “2.10.2 HDD fans” for
instructions.
2. Disconnect all cables from the
backplane.
When disconnecting a cable, hold and firmly pull the cable plug. DO
NOT pull the cable itself. Doing so may damage the cable!
3. From the inner edge, push the
backplane outward so that the
outer edge protrudes slightly
from the slot.
4. From the outer edge, firmly hold
the backplane and carefully
slide it out.