Filter
Top Products
ASUS TUEG-VM User’s Manual72
4. BIOS SETUP
4. BIOS SETUP
Power Up Control
Wake On PS2 KB/PS2 Mouse/CIR [Disabled]
Set this field to [Enabled] if you wish to use your PS2 keyboard, PS2 mouse,
or consumer IR device to power up your computer. This feature requires an
ATX power supply that can supply at least 300mA on the +5VSB lead. The
default is set to [Disabled] because not all computers have the appropriate
ATX power supply. Your computer will not power ON if you set this to
[Enabled] and do not have the appropriate ATX power supply. Configuration
options: [Disabled] [Enabled]
Wake Up By PS2 Keyboard [Space Bar]
When the previous setup item Wake On PS2 KB/PS2 Mouse/CIR is
enabled, you may specify the key(s) to press to power up the computer.
Configuration options: [Space Bar] [Ctrl-Esc] [Power Key] [Wakeup Key]
Wake On USB for S3 or S4 State [Disabled]
This field allows you to use your USB device/s, if any, to power up the
computer from Suspend-to-RAM mode. This feature requires an ATX power
supply that can supply at least 2A on the +5VSB lead. The default is set to
[Disabled] because not all computers have the appropriate ATX power supply.
Your computer will not power on if you set this to [Enabled] and do not
have the appropriate ATX power supply. NOTE: This feature must be set in
conjunction with USB Device Wake Up in 3.4 Motherboard Settings.
Configuration options: [Disabled] [Enabled]
Automatic Power Up [Disabled]
This allows an unattended or automatic system power up. You may configure
your system to power up at a certain time of the day by selecting [Everyday]
or at a certain time and day by selecting [By Date]. NOTE: Automatic Power
Up will not work if the system is powered down by operating systems, such
as Windows 98, which have ACPI support enabled. Configuration options:
[Disabled] [Everyday] [By Date]