Filter
Top Products
69
5. SOFTWARE SETUP
ASUS CUVL-VM User’s Manual
5. SOFTWARE SETUP
5.1 Operating Systems
You should always use the latest operating system and updates when using new
hardware to ensure full compliance. You may use any version of Windows 98/2000/
Millenium, but for Windows 95, you must use OSR 2.0 or later. For Windows NT
4.0, you must use Service Pack 3.0 or later.
5.1.1 Windows 98 First Time Installation
When you start Windows for the first time after the installation of the motherboard,
Windows 98 detects the onboard audio and video chips and may attempt to install a
driver from its system registry. When prompted to restart, select No and then follow
the normal setup procedures on the screen.
5.2 CUVL-VM Motherboard Support CD
To begin using the support CD, insert it into the CD-ROM drive. The support
installation menu should appear. If the menu does not appear, double-click or run
D:\ASSETUP.EXE (assuming that your CD-ROM drive is drive D).
NOTE: The support CD contents are subject to change at any time without notice.
5.2.1 Installation Menus
5. S/W SETUP
OS / Support CD
5.2.2 Applications
• VIA 4 in 1 Drivers: Installs VIA 4 in 1 Drivers V4.24 that automatically detect
and install the Bus Master PCI IDE Driver, VIA AGP Driver, VIA INF Driver,
and IRQ Routing Driver.
• VIA Bus Master PCI IDE Driver: Installs the VIA Bus Master PCI IDE driver.
• S3 ProSavage PL133 Display Driver: Installs the S3 ProSavage PL133 Display
Driver.
• Audio Driver: Installs the necessary audio driver for the onboard audio CODEC.