ASUS TR-DLS User’s Manual 77
5. OS Driver Installation
5. Driver Installation
8. When prompted for the manufacturer-supplied hardware support disk,
insert the appropriate LSI driver diskette containing the Windows NT driver
required to support your LSI adapter(s) and press Enter. The driver files are
distributed with ASUS Driver Support CD and are created from the previous
section for “Preparing a LSI Driver Diskette”.
9. Depending on the driver being installed, Symbios Ultra3 PCI SCSI Driver
is shown highlighted. Press Enter to proceed.
10. The Windows NT Workstation Setup window reappears. If using an IDE
CD-ROM Drive for installation, press S to load additional drives. Another
window appears. Scroll up and select: IDE CD-ROM (ATAPI 1.2/PCI IDE
Controller. Press Enter. (-or-) If you have completed configuring additional
SCSI adapters, press Enter.
11. Windows NT should now recognize the miniport driver and the SCSI
hardware. Press Enter to continue. At this point, simply follow the
Microsoft Windows NT installation procedure. As for the on-board LAN and
VGA, please refer to the later sections for network and graphics driver
installation.
C. Existing System Installation
1. Boot Windows NT system and log on as Administrator.
2. Click on the Start button. Select Settings—>Control Panel.
3. Double click on SCSI Adapters icon.
4. Click the Drivers tab. If the old NCRSDMS.SYS, NCRC810.SYS,
NCRC8XX.SYS, or SYMC810.SYS drivers are listed, select the driver(s)
and choose Remove before adding the new driver. If the driver name of the
driver you are installing SYM_HI.SYS or LSI_U3.SYS is listed, remove it
before adding the new driver. Select OK when the Remove Driver message
prompts: “Are you sure you want to remove this driver?” Click OK.
5. Click Add. A list of installed adapters will appear.
6. Click the Have Disk button.
7. When prompted, insert the appropriate LSI driver diskette containing the
Windows NT driver required to support your LSI adapter(s). The path to
copy manufacturer’s files is: A:\WINNT\MINIPORT and select OK.
8. Depending on the driver being installed, Symbios Ultra3 PCI SCSI Driver
is shown highlighted on the Install Driver menu. If it is not highlighted,
select it. Choose OK.
WinNT4.0 Server