Filter
Top Products
ASUS TR-DLS User’s Manual 83
5. OS Driver Installation
5. Driver Installation
10. A list of suitable drivers appears. The entry for the upgrade driver can be
verified by scrolling the display to the right, and viewing the Location field.
Highlight the driver for the upgrade installation disk and click on the Next
button.
11. In some cases, a message will state that this driver is not digitally signed.
This message informs the user that a non-signed driver is being installed.
Either click No to cancel the installation if the non-signed driver is not
desired or click Yes to continue the installation.
NOTE: Drivers are digitally signed by the Microsoft Windows
Hardware Quality Lab (WHQL). Due to the delay between the general
customer release by LSI Logic of Windows drivers and the completion
of WHQL testing, some drivers that are distributed with adapters or
downloaded from the LSI Logic web site at www.lsilogic.com may not
be digitally signed.
12. The system will load the driver from the LSI driver diskette. A message box
may appear indicating that the target (existing) driver is newer than the
source (upgrade) driver. Click No to cancel the driver upgrade at this point
or click Yes to continue the installation.
Win2000 Server