Filter
Top Products
2-24 Chapter 2: Hardware information
2.6 Switch
1. Clear RTC RAM (3-pin CLRTC_SW)
This onboard switch allows you to enable the clr CMOS switch on the back I/O.
You can clear the CMOS memory and system setup parameters by erasing the
CMOS RTC RAM data. The clr CMOS switch on the back I/O helps you easily to
clear the system setup information such as system passwords.
To erase the RTC RAM:
1. Press down the
clr CMOS switch on the back I/O.
2. Hold down the <Del> key during the boot process and enter BIOS setup to
re-enter data.
clr CMOS switch behavior
System power state G3* S5* S0 (DOS mode) S0 (OS mode) S1 S3 S4
Clearing CMOS
**
*G3: Power off without +5VSB power (AC power loss); S5: Power off with +5VSB power
**The system shuts dowm immediately.
• The clr CMOS switch will not function if the CLRTC_SW switch is moved
to the Disable position, but the shutdwon function in S0 mode (DOS mode)
still works.
• Make sure to re-enter your previous BIOS settings after you clear the
CMOS.
• You do not need to clear the RTC when the system hangs due to CPU
overclocking. With the C.P.R. (CPU Parameter Recall) feature, shut down
and reboot the system so the BIOS can automatically reset CPU parameter
settings to default values. If the system hangs due to overclocking of
memory timing or chipset voltage and the power button fails to function,
pressing down the clr CMOS switch will shut down the system and clear
CMOS simultaneously.
MAXIMUS FORMULA
®
MAXIMUS FORMULA(Special Edition)/
MAXIMUS FORMULA Clear RTC RAM
CLRTC_SW
DisableEnable
(Default)