Filter
Top Products
ROG Maximus Formula (Special Edition) / Maximus Formula 2-39
2.8.4 Installing Fusion Block System accessory
Install your watercooling system to the motherboard using the bundled accessories
to obtain the best thermal solution.
Package contents
1
2
For watercooling system with 3/8” ID tubes
1. Firmly press a tube clip and t the tube into the clip.
2. Press the clip and connect the tube to the waterblock. When done, release
the clip to tighten the two together.
3. Repeat Step 1 and 2 for another tube. Make sure that both tubes are well
connected to prevent leak, and then ll the coolant into the reservoir.
3/8” ID tubes x 2 1/2” to 3/8” ID ttings x 2 10mm to 3/8” ID ttings x 2
1/2” ID tube clips x 2 3/8” ID tube clips x 6