Filter
Top Products
Creating RAID
To create RAID:
1. Press <F11> on your keyboard or click
from the BIOS screen to open
EZ Tuning Wizard screen.
2. Click RAID
then click Next.
• Ensure that your HDDs have no existing RAID volumes.
• Ensure to connect your HDDs to Intel
®
SATA connectors.
3. Select the type of storage for your RAID Easy Backup or Super Speed, then click
Next.
a. For Easy Backup, click
Next then select from Easy
Backup (RAID1) or Easy
Backup (RAID10).
4. After selecting the type of RAID, click Next then click Yes to continue the RAID setup.
5. After the RAID setup is done, click Yes to exit the setup then click OK to reset your
system.
You can only select Easy
Backup (RAID 10) if you
connect four (4) HDDs.
b. For Easy Backup, click Next
then select from Super
Speed (RAID0) or Super
Speed (RAID5).
2-14 Chapter 2: Getting started