Filter
Top Products
ASUS K8U-X Motherboard
1-5
1.4 Before You Proceed
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
K8U-X
®
K8U-X Onboard LED
SB_PWR
ON
Standby
Power
OFF
Powered
Off
1.
Unplug the power cord from the wall socket before touching any
component.
2.
Use a grounded wrist strap or touch a safely grounded object or
to a metal object, such as the power supply case, before handling
components to avoid damaging them due to static electricity.
3.
Hold components by the edges to avoid touching the ICs on them.
4.
Whenever you uninstall any component, place it on a grounded
antistatic pad or in the bag that came with the component.
5.
Before you install or remove any component, ensure that the ATX
power supply is switched off or the power cord is detached from
the power supply. Failure to do so may cause severe damage to
the motherboard, peripherals, and/or components.
Onboard LED
The motherboard comes with a stand-by power LED. When lit, this green LED
indicates that the system is ON, in sleep mode, or in soft-off mode, a reminder that
you should shut down the system and unplug the power cable before removing or
plugging in any motherboard component. The illustration below shows the location
of the onboard LED.