Filter
Top Products
Chapter 2: BIOS Setup
2-18
TRCD [3 CLK]
This item displays the TRCD clock setting. Configuration options: [Auto]
[2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK].
TRAS [8 CLK]
This item displays the TRAS clock setting. Configuration options: [Auto]
[5 CLK] [6 CLK] [7 CLK] [8 CLK] [9 CLK] [10 CLK] [11 CLK] [12 CLK]
[13 CLK] [14 CLK] [15 CLK].
TRP [3 CLK]
This item displays the TRCD clock setting. Configuration options: [Auto]
[2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK].
HyperTransport Configuration
This menu item allow you to change the Hyper Transport settings. Select
an item then press
<Enter>
to display the sub-menu.
Hammer / M1689 Freq. [200MHz]
This item allows you to set the transfer rate of HyperTransport from
Hammer to M1689. Configuration options: [200 MHz] [400 MHz] [600
MHz] [800 MHz] [1000 MHz].
Hammer / M1689 Width [8 Bits]
This item allows you to set the data transfer bandwidth of HyperTransport
Configuration options: [8 Bits] [16 Bits/8 Bits] [2 Bits] [4 Bits].
Hammer to M1689
Frequency Selection
HTT Link Configuration
Hammer / M1689 Freq. [200MHz]
Hammer / M1689 Width [8 Bits]