Filter
Top Products
Chapter 3: Software Support
3-8
3.4 Creating a RAID Driver Disk
To create a RAID driver disk:
1. Insert the motherboard support CD into the CD-ROM drive and locate the
Makedisk.exe utility for your RAID controller. The Makedisk.exe utility for the
RAID driver is located in
\Drivers\RAID\Makedisk.exe”
of the motherboard
support CD.
2. Insert a clean floppy disk into the floppy disk drive and execute Makedisk.exe.
Follow succeeding screen instructions to complete the process.
3. Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk:
1. During the OS installation, the system prompts to press the
F6
key to install
third-party SCSI or RAID driver.
2. Press
<F6>
then insert the floppy disk with RAID driver into the floppy disk drive.
3. Follow the succeeding screen instructions to complete the installation.
For additional information on RAID installation and configuration, refer to the
readme file which is located in [Drivers\RAID\Readme.txt] in support CD.