Filter
Top Products
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DS
1-31-3
1-31-3
1-3
Gigabit LAN solution Gigabit LAN solution
Gigabit LAN solution Gigabit LAN solution
Gigabit LAN solution
The motherboard comes with dual Gigabit LAN controllers to provide a
total solution for your networking needs. The onboard Broadcom BCM5721
Gigabit LAN controllers use the PCI Express interface and have network
throughput close to Gigabit bandwidth. See page 2-24 for details.
Built-in SATA RAID solution Built-in SATA RAID solution
Built-in SATA RAID solution Built-in SATA RAID solution
Built-in SATA RAID solution
The Intel
®
ICH5R allows RAID 0 and RAID 1 configuration for two SATA
connectors and supports the Intel
®
Matrix Storage Technology. See page
2-26 for details.
Zero-Channel RAID (ZCR) solutionZero-Channel RAID (ZCR) solution
Zero-Channel RAID (ZCR) solutionZero-Channel RAID (ZCR) solution
Zero-Channel RAID (ZCR) solution
The Adaptec AIC-7902 PCI-X SCSI controller supports an optional Zero-
Channel RAID card on the available ZCR socket to create RAID
configurations including RAID0 (striping), RAID1 (mirroring), RAID10, and
RAID5. The ZCR capability provides a cost-effective high-performance and
added reliability.
USB 2.0 technology USB 2.0 technology
USB 2.0 technology USB 2.0 technology
USB 2.0 technology
The motherboard implements the Universal Serial Bus (USB) 2.0
specification, dramatically increasing the connection speed from the
12 Mbps bandwidth on USB 1.1 to a fast 480 Mbps on USB 2.0. USB 2.0 is
backward compatible with USB 1.1. See pages 2-24 and 2-28 for details.
Temperature, fan, and voltage monitoringTemperature, fan, and voltage monitoring
Temperature, fan, and voltage monitoringTemperature, fan, and voltage monitoring
Temperature, fan, and voltage monitoring
The CPU temperature is monitored by the ASIC (integrated in the Winbond
hardware monitor) to prevent overheating and damage. The system fan
rotations per minute (RPM) is monitored for timely failure detection. The
ASIC monitors the voltage levels to ensure stable supply of current for
critical components. See page 4-31 for details.