Filter
Top Products
4-364-36
4-364-36
4-36
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
If you forget your BIOS password, you can clear clear it by erasing the
CMOS Real Time Clock (RTC) RAM. See section “2.6 Jumpers” for
information on how to erase the RTC RAM.
4.6.34.6.3
4.6.34.6.3
4.6.3
SecuritySecurity
SecuritySecurity
Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Change Supervisor PasswordChange Supervisor Password
Change Supervisor PasswordChange Supervisor Password
Change Supervisor Password
Select this item to set or change the supervisor password. The Supervisor
Password item on top of the screen shows the default
Not InstalledNot Installed
Not InstalledNot Installed
Not Installed.
After you set a password, this item shows
InstalledInstalled
InstalledInstalled
Installed.
To set or change a supervisor password:
1. Select the
Change Supervisor Password Change Supervisor Password
Change Supervisor Password Change Supervisor Password
Change Supervisor Password item, then press <Enter>.
2. From the password box, type a password composed of at least six
letters and/or numbers, then press <Enter>.
3. Confirm the password when prompted.
The message “Password Installed” appears after you successfully set your
password.
To change the supervisor password, follow the same steps as in setting a
user password.
To clear the supervisor password:To clear the supervisor password:
To clear the supervisor password:To clear the supervisor password:
To clear the supervisor password:
Select the
Change Supervisor Password Change Supervisor Password
Change Supervisor Password Change Supervisor Password
Change Supervisor Password then press <Enter>. The
message “Password Uninstalled” appears.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Boot Sector Virus Protection [Disabled]
<Enter> to change
password.
<Enter> again to
disabled password.