Filter
Top Products
4-284-28
4-284-28
4-28
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setupChapter 4: BIOS setup
Chapter 4: BIOS setup
Power Management [Enabled]Power Management [Enabled]
Power Management [Enabled]Power Management [Enabled]
Power Management [Enabled]
Allows you to enable or disable the motherboard Advance Power
Management (APM) feature. Configuration options: [Enabled] [Disabled]
Video Power Down Mode [Suspend]Video Power Down Mode [Suspend]
Video Power Down Mode [Suspend]Video Power Down Mode [Suspend]
Video Power Down Mode [Suspend]
Allows you to select the video power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Hard Disk Power Down Mode [Suspend]Hard Disk Power Down Mode [Suspend]
Hard Disk Power Down Mode [Suspend]Hard Disk Power Down Mode [Suspend]
Hard Disk Power Down Mode [Suspend]
Allows you to select the hard disk power down mode
Configuration options: [Disabled] [Standby] [Suspend]
Standby Time Out [Disabled]Standby Time Out [Disabled]
Standby Time Out [Disabled]Standby Time Out [Disabled]
Standby Time Out [Disabled]
Allows you to select the specified time at which the system goes on
standby mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min]
[8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
Suspend Time Out [Disabled]Suspend Time Out [Disabled]
Suspend Time Out [Disabled]Suspend Time Out [Disabled]
Suspend Time Out [Disabled]
Allows you to select the specified time at which the system goes on
suspend mode. Configuration options: [Disabled] [1 Min] [2 Min] [4 Min]
[8 Min] [10 Min] [20 Min] [30 Min] [40 Min] [50 Min] [60 Min]
Throttle Slow Clock Ratio [50%]Throttle Slow Clock Ratio [50%]
Throttle Slow Clock Ratio [50%]Throttle Slow Clock Ratio [50%]
Throttle Slow Clock Ratio [50%]
Allows you to select duty cycle in throttle mode.
Configuration options: [87.5%] [75.0%] [62.5%] [50.0%] [37.5%]
[25.0%] [12.5%]
Keyboard & PS/2 Mouse [MONITOR]Keyboard & PS/2 Mouse [MONITOR]
Keyboard & PS/2 Mouse [MONITOR]Keyboard & PS/2 Mouse [MONITOR]
Keyboard & PS/2 Mouse [MONITOR]
When set to [MONITOR], allows you to monitor the PS/2 keyboard and
mouse ports. Setting to [IGNORE] disables the monitoring function.
Configuration options: [IGNORE] [MONITOR]
FDC/LPT/COM Ports [MONITOR]FDC/LPT/COM Ports [MONITOR]
FDC/LPT/COM Ports [MONITOR]FDC/LPT/COM Ports [MONITOR]
FDC/LPT/COM Ports [MONITOR]
When set to [MONITOR], allows you to monitor the floppy disk controller,
LPT port, and serial communication ports. Setting to [IGNORE] disables the
monitoring function. Configuration options: [IGNORE] [MONITOR]
Power On Ring [Disabled]
Power On LAN [Disabled]
Power On By PME# [Disabled]
Power On By RTC Alarm [Disabled]
Power On By PS/2 Keyboard [Disabled]
Power On By PS/2 Mouse [Disabled]
Use the arrow down key to scroll down the menu.