Asus NCL-DS Network Card User Manual


 
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DSASUS NCL-DS
ASUS NCL-DS
2-312-31
2-312-31
2-31
11.11.
11.11.
11.
ATX ATX
ATX ATX
ATX
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,power connectors (24-pin ATXPWR1,
power connectors (24-pin ATXPWR1,
8 8
8 8
8
-pin -pin
-pin -pin
-pin
ATX12V1ATX12V1
ATX12V1ATX12V1
ATX12V1
))
))
)
These connectors are for SSI power supply plugs. The power supply
plugs are designed to fit these connectors in only one orientation.
Find the proper orientation and push down firmly until the connectors
completely fit.
Use of an SSI 12 V Specification 2.0-compliant power supply unit
(PSU) that provides a minimum power of 450 W is recommended
for a fully-configured system.
Do not forget to connect the 8-pin ATX +12 V power plug;
otherwise, the system will not boot up.
Use of a PSU with a higher power output is recommended when
configuring a system with more power consuming devices. The
system may become unstable or may not boot up if the power is
inadequate.
You must install a PSU with a higher power rating if you intend to
install additional devices.
®
NCL-DS
NCL-DS ATX Power connectors
8-pin
GND12V
GND12V
GND12V
GND12V
For Power Supply
with 24-pin
Power Connector
24-pin Power Connector
+3 Volts
+3 Volts
Ground
+5 Volts
+5 Volts
Ground
Ground
Power OK
+5V Standby
+12 Volts
-5 Volts
+5 Volts
+3 Volts
-12 Volts
Ground
Ground
Ground
PSON#
Ground
+5 Volts
+12 Volts
+3 Volts
+5 Volts
Ground
ATXPWR1 ATX12V1
®
NCL-DS
NCL-DS BMC connector
BMCCONN1
+5VSB
+5VSB
BMC SMBCLK
12CCLK1
PSON#
BMC_RST#
PWROK
PSONEN#
+5VSB
+5VSB
BMC SMBDATA
12CDATA1
FP_PWRBTN#
BMC_PRESENT#
BMC_SMI#
GND
12.12.
12.12.
12.
BMC connector (16-pin BMCCONN1)BMC connector (16-pin BMCCONN1)
BMC connector (16-pin BMCCONN1)BMC connector (16-pin BMCCONN1)
BMC connector (16-pin BMCCONN1)
This connector is for the ASUS server management card, if available.